Rig Tech RT-400B 1,000 HP. Grooved Lebus drum for 1 1/8" drill line. 42“ x 10" brake with an Eaton WCB424 auxiliary brake. Maximum hook load of 435,000 lbs.
International Derrick Service 77' mast with 500,000 lb static hook load. 8'1" wide x 6' deep. 825,000 gross nominal capacity. IDS 500,000 SHL crown block.
Sub-Structure
International Derrick Service 22' hydraulic lift, 250 ton slip bowl beam capacity. IDS hydraulic pipe arm for handling of 3 1/2" to 5" range II or III drill pipe, 6 1/4" to 9" drill collars, and Range III casing from 7" to 20".
Venturetech XK-250 hydraulic top drive. 250T rated capacity with a working pressure of 5,000 psi.
Oilworks OWI-1000 wireline unit with 12,000' of .092" wireline.
Rig comes equipped with driller control house, complete with electronic controls for rig operation and drilling control functions; includes automatic driller and iron roughneck.
(2) Weatherford MP10 1,300HP triplex mud pumps. Maximum working pressure and test pressure of 5,000 psi.
(2) 630 bbls curved bottom mud tanks. (5) Oilworks &lduo;Pit Boss” 10 HP mud agitators, located in tanks. (1) 4“-K-9,000# Herbert mud hopper, with a 5" x 6“ MCM pump and 11" impeller. (2) Derrick FLC-504 shale shakers, with a nominal flow rate of 500. With desander and desilter.
(2) Caterpillar 3512C 1476HP, equipped with spark arrestors and mufflers installed. (2) AC generators, Caterpillar 1,250kW.
(1) Sullican-Palatek H 25-D electric air compressor. 110 CFM rated capacity with 125 psi working pressure. Continuous power of 25HP.
Cowan integrated 4-sheave split block with 250 ton rated capacity.
(1) Townsend type-82 13 5/8" locking double ram with a working pressure of 3,000 psi. Top and bottom connection of 13 5/8" x 3M.
(1) cylindrical 10'-6" diameter, custom fabricated, 500 bbl.
(2) Odessa pump 2" x 3" centrifugal 20 HP motors.
(1) custom fabricated 265 bbl, cylindrical tank with an 8' diameter.
This rig only takes 17 loads to move, tubulars are an additional 7 loads.